This Video Recording Software for IP Cameras Will Change Your Life!
One of the most significant challenges faced by video surveillance systems is the storage of videos. Large amounts of data are generated every day, and storing this data can be costly and time-consuming. One way to increase the storage time of videos is to use time-lapse recording. This feature enables the software to capture images at specific intervals and then combine them into a video. Time-lapse recording
can significantly reduce the amount of data stored on the disk, making it easier to manage and analyze.
When it comes to setting up an IP-based surveillance system, ONVIF (Open Network Video Interface Forum) is a widely used standard that aims to facilitate the integration of network video products, regardless of their manufacturer. However, there are several challenges that users may face during the process, especially when it comes to discovering IP cameras and dealing with ONVIF version incompatibility.
Connecting multiple IP cameras with identical factory settings and IP addresses can be a challenge, but there are practical solutions to help you integrate all cameras successfully. If the cameras have the same IP address, you can change the IP address of one or more cameras to prevent IP conflicts. This can be done by connecting the camera directly to your computer, accessing the cameras web interface, navigating to the network settings, changing the IP address, and saving the changes. Alternatively, you can use the manufacturers software to detect and list all connected cameras, change the IP address of each camera individually, and ensure that each camera has a unique IP address. Another method to resolve IP conflicts is to use a DHCP server, which automatically assigns unique IP addresses to each connected device. For this, you will need to enable DHCP on your router or network switch, and then enable DHCP on the cameras through the web interface or manufacturers software. The cameras will then receive unique IP addresses from the DHCP server. Additionally, you can use a Virtual Local Area Network (VLAN) to isolate cameras and assign different IP addresses. This involves configuring the VLAN on your router or switch, creating a VLAN with a unique IP range, connecting the cameras to the VLAN, changing the IP address of each camera to match the VLAN IP range, and saving the changes. This will ensure that each camera has a unique IP address, preventing conflicts and allowing for smooth operation of your surveillance system.